Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose Ameristar Construction
Rowan Construction Group Miami provides independent Ameristar construction service across Miami-Dade County, specializing in cabinet installation, refacing, and full kitchen remodeling using Ameristar-compatible parts and warranty-safe practices. Our crews have worked on Ameristar Town & Country, Value Series, and plywood-box lines in Miami homes since 2007, learning how this brand’s particleboard substrates and thermofoil finishes respond to South Florida’s humidity and salt air. We are not affiliated with or authorized by Ameristar; we are independent service providers who source OEM and equivalent aftermarket components based on what serves the repair. Call (786) 321-4970 for a free written estimate.
Why Trust Rowan Construction Group Miami for Your Ameristar Construction?
Grant Rowan learned the trade at Los Angeles Trade-Technical College, spent two years in the building construction program, then ran crews through gut renovations in Coconut Grove and new commercial builds across Miami-Dade. That background shows in how we approach Ameristar work: we name the substrate, identify the failure, and quote the fix in writing before anyone touches a tool.
Our techs know Ameristar’s fastener spacing, the torque spec on hinge screws into MDF cores, and which drawer-glide models interchange with the original hardware. We’ve replaced swollen Value Series bases in Little Havana, re-hung delaminated Town & Country doors in Coral Gables, and upgraded stock-line shelf supports for homeowners whose cast-iron cookware collections exceeded the factory rating. In every case, we document with photos, write the scope, and stick to the number.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. Under the 365-Day Done Right Promise, if it is not done right, we make it right. That applies to Ameristar work exactly as it applies to every other brand we handle.
Styles & brands we work with
Common Ameristar Construction Problems We Fix in Miami
- Particleboard substrate swelling in Value Series base cabinets. Miami’s humidity is relentless, and a slow sink leak turns Ameristar’s particleboard cabinet floor into crumbly mush within months. We see this most in pre-Andrew homes in Allapattah and West Flagler where plumbing is older and cabinets sit tight to the wall with no air gap. Our fix: cut out the damaged box, sister in marine-grade plywood sides, and seal the new base with a moisture barrier before reinstalling.
- Thermofoil delamination on cabinet doors. South-facing Miami kitchens bake. The PVC laminate on Ameristar doors peels at the edges where heat and UV break down the adhesive. We’ve learned to check the exposure before quoting: a full reface makes sense if delamination is widespread, but spot repair with heat-activated adhesive and edge banding works for isolated panels.
- Hinge screw pull-out in MDF-core doors. Ameristar’s MDF-core doors don’t hold screws the way solid wood does. When original hinges are overtightened or cabinets get slammed repeatedly, the screw holes strip and the door sags. We drill and epoxy in hardwood dowels, then reinstall with Ameristar-compatible soft-close hinges that reduce impact.
- Sagging wall cabinet shelves in stock lines. The factory shelf-pin spacing on Ameristar Value Series cabinets wasn’t designed for heavy Calphalon collections. We add supplemental shelf standards or upgrade to full-extension drawer glides that transfer load to the cabinet sides instead of pin holes.
- Corroded hardware in coastal installations. Miami’s salt air attacks standard steel hinges and drawer slides. On jobs from Miami Beach to Key Biscayne, we spec stainless or hot-dip galvanized hardware as baseline, not upgrade, because anything less needs replacement in three to five years.
Ameristar Parts & Our Repair-vs-Replace Approach
We stock Ameristar OEM hinges, drawer glides, and shelf supports at our Miami warehouse when they’re available and competitively priced. When OEM lead times stretch or pricing doesn’t make sense, we install equivalent aftermarket hardware that meets or exceeds the original spec, tested for coastal humidity resistance.
For cabinets with swelling or delamination beyond the first few inches, we recommend replacing just the affected boxes rather than refacing. Covering structural decay with new doors wastes money and hides the problem. We’ve saved Miami homeowners thousands by rebuilding the carcass and reusing intact door fronts.
Call (786) 321-4970 and we’ll inspect the damage, photograph it, and give you a written repair-or-replace comparison.
Our Ameristar Service Process - Step by Step
- 1
Diagnosis. We arrive with a camera and a moisture meter. For Ameristar cabinets, we check particleboard density at the base, thermofoil adhesion at door edges, and hinge integrity in MDF cores. We photograph everything and explain what we found before quoting.
- 2
Written quote. Under the Haven Standard, you get a flat price with line-item scope, hardware specs, and timeline. No work proceeds without your signature.
- 3
Repair or install. Our crew uses Ameristar-compatible or OEM parts as specified. For installations, we verify plumb and level at every cabinet, shim for Miami’s often-settled slab floors, and anchor to wall studs with stainless hardware.
- 4
Testing and documentation. Every door, drawer, and hinge gets operated twenty times. We shoot final photos, note any adjustments, and leave you with a documented record and written warranty.
- 5
365-Day follow-through. If something isn’t right, we return and make it right. The promise is printed, not implied.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Miami
We work across Ameristar’s residential lines: Town & Country semi-custom wood cabinets with plywood box construction; Value Series stock cabinets with particleboard substrates; and Ameristar by American Standard plywood-box lines. For mechanical coordination on full kitchen remodels, we also interface with Ameristar M4 and M5 series heat pumps and air handlers, including Miami Beach Ameristar service coordination.
We keep common Ameristar hinge styles, 22-inch full-extension drawer glides, and shelf-pin kits in stock for same-week turnaround on most repairs. Custom-color door replacements typically ship within two weeks.
We Also Service These Brands
Rowan Construction Group Miami sources across fifty-plus vetted brands. On kitchen projects, we regularly pair Ameristar-compatible work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. Our written quotes pull from this depth so you get honest numbers, not inflated single-brand pricing.
FAQs - Ameristar Construction Service in Miami
We can match most Ameristar finishes within a close tolerance, though exact color-matching depends on the age of the original and sun exposure. Thermofoil colors are more consistent than stained wood, which shifts over time. We always bring a physical sample for your approval before ordering. Call (786) 321-4970 and we’ll compare on-site.
If the damage is limited to the cabinet floor and first few inches of the sides, repair is usually cost-effective: cut out the rot, rebuild with marine-grade plywood, and seal. If swelling has traveled up the panels or into multiple cabinets, replacement of the affected boxes saves money long-term. We photograph the extent and give you both numbers in writing. Call (786) 321-4970 for a free inspection.
We use genuine Ameristar OEM hardware when it’s available and competitively priced. When OEM parts are back-ordered or overpriced, we install equivalent aftermarket components that meet or exceed the original load and cycle ratings. We specify which we’re using in your written quote before work begins.
Yes. We regularly pair Ameristar cabinet runs with Cambria, Silestone, and other quartz surfaces. The key is proper support: quartz needs a fully flat, level base with no overhang beyond the cabinet’s structural rating. We measure and shim during cabinet install so the counter fabricator has a solid foundation.
A standard 10-by-10 kitchen with Ameristar stock or semi-custom cabinets takes three to five working days, including removal, wall prep, install, and hardware adjustment. Full kitchen remodels with electrical, plumbing, and counter installation run four to eight weeks depending on permit timing and material availability. Miami-Dade permit review adds one to three weeks for most kitchen projects.
Most Ameristar cabinet work falls within these ranges:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,720 - $15,340 |
| Countertop Installation | $2,360 - $7,670 |
| Backsplash Installation | $945 - $2,950 |
| Full Kitchen Remodel | $16,520 - $53,100 |
Your exact quote depends on cabinet line, linear footage, and whether we’re repairing existing boxes or starting fresh. Call (786) 321-4970 for a written estimate - they’re free, and we review competitor quotes line by line at no charge.
Book Your Ameristar Service in Miami, FL
Rowan Construction Group Miami has delivered 4,000-plus projects since 2007, every one with a written price before work started and a documented photo record when the crew left. For Ameristar cabinet repair, installation, or full kitchen remodeling in Miami and Ameristar Construction in Brownsville, FL, call (786) 321-4970 to schedule your free estimate. We’ll measure twice, write it down, then build it.
Written by Grant Rowan, Owner at Rowan Construction Group Miami, serving Miami since 2007.
