Tamko Bathroom Remodeling Nationwide

Tamko Bathroom Remodeling: The Miami Owner’s Guide

Rowan Construction Group Miami stocks and installs Tamko-compatible bathroom remodeling components, with typical installed pricing from $10,620 to $33,040 depending on scope and finish selections. We carry common Tamko shower surround panels, trim kits, and waterproofing accessories on our trucks, and most replacements in Coral Gables, Pinecrest, and Aventura can be scheduled within 48 hours. Homeowners usually discover a problem when they notice soft drywall behind a shower valve, grout cracking in a pattern that follows the panel seams, or a musty smell that returns after cleaning - all signs that the waterproofing layer behind the visible surface has failed.

Call (786) 321-4970

Which Tamko Models This Applies To

Tamko’s bathroom product line centers on the EnVision shower wall panels and the Titan waterproofing system, both sold through regional distribution rather than big-box retail. The EnVision panels come in 36-inch, 48-inch, and 60-inch widths with a tongue-and-groove vertical seam system; the critical compatibility point is the trim thickness, which shifted from 5/16-inch to 3/8-inch in the 2019 production run. If you’re matching trim to existing panels, check the backside stamp - “EV-36-19” or later indicates the thicker profile.

The Titan waterproofing membrane, a liquid-applied elastomeric that Tamko positions as an alternative to traditional hot-mop or sheet membrane, requires a specific primer (Titan Prime) on gypsum-based backer boards common in Miami’s 1980s-2000s construction. We’ve seen homeowners buy the membrane off a contractor’s shelf and skip the primer, then watch the bond fail within 18 months in South Florida’s humidity. For OEM versus aftermarket: Tamko’s membrane is proprietary and we source it direct, but the EnVision trim profiles have quality aftermarket equivalents from Trim-Tex that we stock when lead times stretch past two weeks.

Signs Your Tamko Bathroom Remodeling Is Failing

• Soft or discolored drywall near fixtures. The Titan membrane has lost adhesion at a penetration point - valve stem, showerhead arm, or drain flange - letting moisture wick into the substrate. In Miami’s coastal humidity, this accelerates once it starts; we find the damage typically extends 6-8 inches beyond the visible stain.
• Cracking grout that follows panel seams. EnVision panels expand and contract with temperature swings; if the trim kit wasn’t installed with the manufacturer’s expansion gap, the panel edge pushes against the grout line until it fractures. This isn’t a grout problem - it’s a panel movement problem masked as one.
• Musty odor that persists after deep cleaning. The waterproofing layer is compromised somewhere invisible, often at the curb-to-wall junction where the Titan membrane meets the shower pan. Mold colonizes the cavity before it shows on the surface; by the time you smell it, the substrate is wet.
• Panel edges lifting or delaminating from the wall. The adhesive system failed, usually from incompatible substrate preparation - we see this where a previous installer applied EnVision panels over painted drywall without scarifying the surface first, violating Tamko’s installation bulletin TB-2017-04.
• Water pooling outside the shower perimeter. The curb detail failed, either from membrane discontinuity or from EnVision panel bottom edges sitting in standing water. In Miami’s hard water, mineral deposits often crust the failure point, making the leak path harder to spot until the subfloor softens.

Before

After

Replacement Cost & What’s Included

Tamko bathroom remodeling in Miami runs $10,620-$33,040 installed, with the spread driven by three factors: whether we’re replacing panels only or opening walls to repair substrate, whether the shower pan and drain assembly need replacement, and finish level - standard EnVision patterns versus premium textured or custom-color orders that add 4-6 weeks to delivery.

Our written quote itemizes parts and labor separately. A typical mid-range replacement - EnVision panels in a 48-inch alcove, new Titan membrane application, valve trim reset, and grout - lands around $14,500-$18,000. That includes the documented photo record of substrate condition before we close walls, the signed scope with no hidden line items, and our 365-Day Done Right Promise. Under Clause 1 of the Haven Standard, the price you sign is the price you pay; no change proceeds without a signed change order, which is how we’ve kept projects within a few percent of quote across 4,000-plus jobs since 2007.

DIY or Call Us?

There’s safe inspection, and there’s work that belongs to a crew with the right tools and documentation.

An owner can check the panel backside stamp for model year, verify whether the trim gap exists, and confirm water pressure at the valve - all useful information to share when you call. What we don’t recommend: cutting into a wet wall without moisture-mapping the full extent, attempting to re-adhere Titan membrane over compromised substrate, or reinstalling EnVision panels without the expansion-gap spacing gauge. The membrane application requires a mil-thickness gauge and ambient humidity below 85%, a condition that lasts about four hours on a typical Miami summer morning.

More critically, opening a shower wall without containment protocol risks asbestos exposure in pre-1985 Miami construction, and disturbing electrical routing near a wet location without lockout procedure is a hazard we won’t describe step-by-step. We carry the testing kits, the containment, and the documentation that your insurance and future sale will want to see. Call (786) 321-4970 and we’ll schedule a free estimate with the written price delivered before any work starts.

FAQs