Unilock Home Additions & ADU Nationwide

Unilock Home Additions & ADU: The Miami Owner’s Guide

We stock and install Unilock-compatible hardscape systems for home additions and ADU projects in Miami, with typical installed pricing for full addition work running $53,100-$153,400 and ADU construction from $106,200-$259,600. Most Unilock paver patio, walkway, and retaining wall integrations for addition footprints can be scoped and priced same-week once we measure the site. Miami owners usually discover their Unilock surface is failing when settling cracks appear after heavy rain seasons, when pool-adjacent coping shifts in Coral Gables’ limestone substrate, or when a previous contractor used the wrong base depth for Florida’s sandy soils and the pavers start rocking underfoot.

Call (786) 321-4970

Which Unilock Models This Applies To

Unilock manufactures several product lines relevant to home addition and ADU hardscaping in Miami, and matching the right system to your existing installation matters for both structural performance and visual continuity. The Beacon Hill Flagstone and Richcliff lines appear frequently in Coconut Grove and Pinecrest addition projects for their permeable base compatibility, while the Brussels Block series handles vehicular loads on ADU driveway extensions. To identify your installed product, check the spacer nibs on paver edges (Unilock’s patented system leaves distinct 3/16-inch gaps) or look for the laser-etched “U” and production date code on the bedding face of retaining wall units.

We source OEM Unilock through authorized distribution, though for certain applications we specify quality aftermarket equivalents from Belgard or Techo-Bloc when the engineering spec matches and lead times favor the project schedule. The critical compatibility gotcha in Miami: Unilock’s permeable pavers require a specific open-graded stone base (ASTM No. 2 or No. 57) that differs from conventional concrete paver bedding. A crew that installs standard pavers over this base will create a failure point within two wet seasons. We verify base type before quoting any Unilock repair or extension.

Signs Your Unilock Home Additions & ADU Is Failing

• Pavers rocking or tilting underfoot. This indicates base erosion or insufficient compaction during original installation. In Miami’s sandy soils, especially near coastal zones like Key Biscayne, water migration washes out bedding material and leaves voids that let pavers shift.
• Edge restraint pulling away from the perimeter. Plastic or aluminum edge restraints fail when spike anchors corrode in our salt-air environment or when the restraint was installed without adequate buried depth. The fix requires removing several feet of pavers, re-anchoring, and relaying.
• White haze or efflorescence blooming on the surface. Calcium hydroxide migration from the concrete matrix is common after Miami’s heavy summer rains. It’s usually cosmetic, but persistent efflorescence can signal water trapped in a poorly draining base.
• Retaining wall bowing or step-cracking. Unilock wall units depend on proper geogrid reinforcement and drainage aggregate behind the face. When landscapers skip the geogrid layer or use native soil backfill, hydrostatic pressure builds during tropical downpours and pushes the wall out of plumb.
• Joint sand washing out between pavers. Polymeric sand failure happens when installers apply it before a rain event or use the wrong grade for Unilock’s joint width. In Miami, we see this accelerated by pressure-washing with excessive nozzle pressure.

Before

After

Replacement Cost & What’s Included

For Unilock hardscape work tied to home additions and ADUs in Miami, our pricing follows the project scope rather than a per-square-foot shortcut. A Unilock paver patio extension for an ADU footprint typically falls within the $4,130-$12,980 range for the hardscape portion itself, while full home addition construction including integrated Unilock walkways and retaining walls runs $53,100-$153,400. ADU construction with complete site work and Unilock surfaces starts at $106,200.

What drives the range: base condition (whether we can reuse existing compacted stone or excavate to virgin soil), access for equipment in Miami’s tight lots, and the Unilock product tier selected. Our quotes itemize demolition, base prep, materials, and installation labor separately. Under Clause 1 of The Haven Standard, that written price is delivered before any work starts. The 365-Day Done Right Promise covers the installation, and every visit includes a documented photo record showing base conditions before and after.

DIY or Call Us?

An owner can safely inspect their Unilock installation for the symptoms above, and you can verify product identity by lifting a loose edge paver to check for the Unilock etching. What goes wrong with DIY: base compaction requires a plate compactor operated at proper moisture content and lift thickness (typically 6-8 inches per lift for Miami soils), and retaining wall rebuilds need geogrid lengths calculated from engineered charts based on wall height and soil type. We’ve been called to correct DIY paver resets in Palmetto Bay where the homeowner skipped the bedding sand layer entirely, and the relay cost exceeded the original professional installation.

Rowan Construction Group Miami is an independent service provider, not affiliated with Unilock. If your Unilock surfaces are integrated with a planned addition or ADU, call (786) 321-4970 to schedule your free estimate. We’ll measure the site, identify your existing product line, and put the scope and price in writing before any work starts.

FAQs